The design of precision pressure sensor with pneumomechanical resonator
Рубрика:
| 1Chernyak, MG, 2Bondarenko, OM, 3Petrovskyi, SI 1National Technical University of Ukraine «Igor Sikorsky Kyiv polytechnic institute», Kyiv, Ukraine 2Research and Analytical Center of critical technologies navigational instrumentat of the National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine 3National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine |
| Kosm. nauka tehnol. 2003, 9 ;(1):029-034 |
| https://doi.org/10.15407/knit2003.01.029 |
| Язык публикации: Ukrainian |
Аннотация: We describe the procedure of the design of the primary and secondary transducers of the precision pressure sensor with pneumo-mechanical resonator. The main calculated relations for the design is presented. The pressure sensor is characterig by a design uncom-plexity and high technological efficiency. A high manufacturability and the possibilities for precision pressure measurements of the device are showed on the basis of numerical estimates.
|
| Ключевые слова: precision pressure sensor, rocket and space technology, sensor equipment |
References:
1. Pisarenko G. S., Yakovlev A. P., Matveev V. V. Handbook on the Resistance of Materials, 472 p. (Nauk. Dumka, Kiev, 1988) [in Russian].
2. Timoshenko S. P., Voinovsky-Krieger S. Plates and shells, 472 p. (Fizmatgiz, Moscow, 1963) [in Russian].
3. Hog E., Arora Ya. Applied optimal design, 356 p. (Mir, Moscow, 1983) [in Russian].
4. Chernyak M. G., Bondarenko O. M., Kovalenko T. V. Physicomathematical modeling of transdusers with pneumomechanical resonator. Kosm. nauka tehnol., 5 (5-6), 92—102 (1999) [in Ukrainian].