SPECIAL-PURPOSE FILTER ELEMENTS BASED ON METALLIC POROUS MATERIALS FOR HIGH-QUALITY PURIFICATION OF COMPRESSED AIR AND GASES
Рубрика:
| SHAPOVAL, І, DUROV, O, STETSYUK, Т, SHAPOVAL, А |
| Space Sci. & Technol. 2026, 32 ;(3):45-52 |
| https://doi.org/10.15407/knit2026.03.045 |
| Язык публикации: English |
Аннотация: Th e relevance of the work is determined by the need to provide a range of modern technological devices with eff ective fi lter elements
designed for high-quality purifi cation of air and various gases. Filters ensure the reliable operation of a number of products for specifi c technical purposes, for example, in the production of throttle cryocoolers of IR devices. Th ey can be manufactured using microporous metal powder materials with an average hydraulic diameter of the pore channels of less than 15 mm. An important factor in the operation of fi lter elements is also their magnetic properties, namely, extremely low magnetization ability. Th e technology and methods for obtaining metal materials for transpiration purposes, with optimal physical and technical characteristics for manufacturing non-magnetic fi lter elements, have been worked out. Th e changes in the shape of powder particles and their magnetic properties during milling are analyzed. Besides, the optimal modes for obtaining the maximum amount of powder of the required size and the need for a preliminary annealing operation to restore the non-magnetic properties of the fi lter elements obtained are determined. Th e task of the work is to develop methods for manufacturing non-magnetic fi lter elements for high-quality purifi cation of air and gases from coarse domestic powder, thereby eliminating the need to import fi ne steel powder. Th e technology for the manufacture of fi lter elements, for fi ne purifi cation of air and gases, from coarse powders of domestic production, was worked out, it consists of the following operations: milling with a disperser and sieving of particles; annealing of the resulting powder in the vacuum to restore its non-magnetic properties and remove strain hardening; formation of blanks of fi lter elements; sintering of fi lter element; calibration. Th e results obtained in the work are important for the creation of highquality domestic equipment for the intended purpose. |
| Ключевые слова: disperser, filter elements, powder dispersion, throttle micro-cooler |
References:
1. Fedorchenko I. M. (1963). Fundamentals of Powder Metallurgy. Red. I. M. Fedorchenko, R. A. Andrievskyy. Kiev: Publishing
house Acad. Sciences Ukr. SSR, 420 p. [In Ukrainian]
2. Ivensen V. A., Baranova I. V. (1979). Hard alloys. Works collection of VNIITS. Moscow: Metallurgy Publishing House. Vol. 1,
7-40.
3. Kim W. C., Byun J. (2024). Fabrication of porous sintered body using shape-controlled 316L stainless steel powder by highenergy
ball milling. Archives of Metallurgy and Materials, 69, Issue 1, 109-112.
https://doi.org/10.24425/amm.2024.147796
4. Kostornov A. G. (2002). Materials Science of Dispersed and Porous Metals and Alloys. Kiev: Naukova dumka. Vol. 1, 571 p. [In Ukrainian]
5. Liberson G. A. (1975). Fundamentals of Powder Metallurgy. Moscow: Metallurgy, 200 p.
6. Mallinson J. C. (1996). Magneto-resistive heads: fundamentals and applications: v. 1 (Electromagnetism Series).
Publisher: Academic Press Inc., 250 p.
7. NMK (2026). Stainless steel grades, their features and purpose [online].
URL: https://nmk.com.ua/index.php?route=extension/blog/blog&blog_id=21&srslti...
(Last accessed: April 9, 2026).
8. Qu Z., Zhang P., Lai Y., Wang Q., Song J., Liang S. (2022). Infl uence of powder particle size on the microstructure of a
hot isostatically pressed superalloy. J. Materials Research and Technology, 16, 1283-1292.
https://doi.org/10.1016/j.jmrt.2021.12.081
9. Rebinder P. A. (1979). Surface phenomena in dispersed systems: Physical and chemical mechanics. Moscow: Nauka. 384 p.
10. Sheleg V. K., Kaptsevich V. M., Savich V. V., Sorokina A. N. (1992). Infl uence of original powder properties on the structural
characteristics of porous materials. Powder Metallurgy and Metal Ceramics, 31, Issue 2, 138-142.
https://doi.org/10.1007/BF00794049
11. Sorokin V. K., Khrenov V. A. (1984). Prediction of the fi ltering and mechanical properties of porous cold-worked stainless
steel. Powder Metallurgy and Metal Ceramics, 23, Issue 9, 732-734.
https://doi.org/10.1007/BF00791835
12. Vicenzi B., Boz K., Aboussouan L. (2020). Powder metallurgy in aerospace - fundamentals of PM processes and examples of
applications. Acta Metallurgica Slovaca, 26, Issue 4, 144-160.
https://doi.org/10.36547/ams.26.4.656
13. Vityaz P. A., Sheleg V. K., Kaptsevich V. M., Aleksandrov V. M., Zamakh M. A., and Azarov S. M. (1985). Eff ect of bronze
powder particle shape on the stability properties of porous materials. Powder Metallurgy and Metal Ceramics, 24, Issue 12,
956-959.
https://doi.org/10.1007/BF00805257
house Acad. Sciences Ukr. SSR, 420 p. [In Ukrainian]
2. Ivensen V. A., Baranova I. V. (1979). Hard alloys. Works collection of VNIITS. Moscow: Metallurgy Publishing House. Vol. 1,
7-40.
3. Kim W. C., Byun J. (2024). Fabrication of porous sintered body using shape-controlled 316L stainless steel powder by highenergy
ball milling. Archives of Metallurgy and Materials, 69, Issue 1, 109-112.
https://doi.org/10.24425/amm.2024.147796
4. Kostornov A. G. (2002). Materials Science of Dispersed and Porous Metals and Alloys. Kiev: Naukova dumka. Vol. 1, 571 p. [In Ukrainian]
5. Liberson G. A. (1975). Fundamentals of Powder Metallurgy. Moscow: Metallurgy, 200 p.
6. Mallinson J. C. (1996). Magneto-resistive heads: fundamentals and applications: v. 1 (Electromagnetism Series).
Publisher: Academic Press Inc., 250 p.
7. NMK (2026). Stainless steel grades, their features and purpose [online].
URL: https://nmk.com.ua/index.php?route=extension/blog/blog&blog_id=21&srslti...
(Last accessed: April 9, 2026).
8. Qu Z., Zhang P., Lai Y., Wang Q., Song J., Liang S. (2022). Infl uence of powder particle size on the microstructure of a
hot isostatically pressed superalloy. J. Materials Research and Technology, 16, 1283-1292.
https://doi.org/10.1016/j.jmrt.2021.12.081
9. Rebinder P. A. (1979). Surface phenomena in dispersed systems: Physical and chemical mechanics. Moscow: Nauka. 384 p.
10. Sheleg V. K., Kaptsevich V. M., Savich V. V., Sorokina A. N. (1992). Infl uence of original powder properties on the structural
characteristics of porous materials. Powder Metallurgy and Metal Ceramics, 31, Issue 2, 138-142.
https://doi.org/10.1007/BF00794049
11. Sorokin V. K., Khrenov V. A. (1984). Prediction of the fi ltering and mechanical properties of porous cold-worked stainless
steel. Powder Metallurgy and Metal Ceramics, 23, Issue 9, 732-734.
https://doi.org/10.1007/BF00791835
12. Vicenzi B., Boz K., Aboussouan L. (2020). Powder metallurgy in aerospace - fundamentals of PM processes and examples of
applications. Acta Metallurgica Slovaca, 26, Issue 4, 144-160.
https://doi.org/10.36547/ams.26.4.656
13. Vityaz P. A., Sheleg V. K., Kaptsevich V. M., Aleksandrov V. M., Zamakh M. A., and Azarov S. M. (1985). Eff ect of bronze
powder particle shape on the stability properties of porous materials. Powder Metallurgy and Metal Ceramics, 24, Issue 12,
956-959.
https://doi.org/10.1007/BF00805257
14. Wang S., Guo X., Lu H., Liu H. (2022). Experimental study on the eff ects of particle characteristics and pressurization methods
on powder compression. Chemical Engineering Science, 260, 117927.
https://doi.org/10.1016/j.ces.2022.117927
on powder compression. Chemical Engineering Science, 260, 117927.
https://doi.org/10.1016/j.ces.2022.117927