Low cost Dosimeter Module for MVA Lunar Lander Mission

1Elfiky, D, 1Aziz, S, 1Hesham, N, 2Ahmed, A
1National Authority for Remote Sensing and Space Science, Cairo, Egypt
2Egyptian Space Agency, Cairo, Egypt
Space Sci. & Technol. 2023, 29 ;(4):119-126
https://doi.org/10.15407/knit2023.03.119
Publication Language: English
Abstract: 
Understanding the lunar radiation environment is crucial for future space exploration missions, as the lack of atmospheric and magnetic shielding allows charged particles of varying energies and origins to penetrate the surface of the Moon. In a space radiation environment, it is common practice to use radiation dosimeters to measure absorbed dose and dose rate.
     In this study, the payload will include a radiation dosimeter capable of measuring the radiation intensity at the landing site's surface. The design concept and implementation of a radiation readout system for the real-time measurement of gamma absorbed dosage and dose rate at the surface of the landing area for the MVA mission are based on a photodiode sensor that is commercially available and will be used as a gamma radiation sensor. The module experienced low levels of activity (Cs137, Co60, and Sr90). The performance of the photodiode-based module has been demonstrated by the Geiger counter. Due to its low cost and high sensitivity, the radiation module of this type has clear advantages.
Keywords: Lunar lander, photodiode sensor, Radiation dosimeter, TIA
References: 

1. Gieseler J., Oleynik. P. (2020). Radiation Monitor RADMON aboard Aalto-1 CubeSat: First results, Adv. Space Res., 66, 52-65,
https://doi.org/10.1016/j.asr.2019.11.023

2. Narici L. et al, (2015). Radiation Measurements Performed with Active Detectors Relevant for Human Space Exploration, Front Oncol. 2015, 5: 273, Published online 2015, Dec 8.
https://doi.org/10.3389/fonc.2015.00273.

3. Graeme J. G. (1996). Photodiode Amplifiers: OP AMP Solutions, McGraw Hill Professional,

4. Knoll G. F. (2010). Radiation Detection and Measurement, 4th edition, Hoboken, N.J: Wiley, 2010.

5. Gooda P. H., Gilboy. W. B., (1987). High resolution alpha spectroscopy with low cost photodiodes, Nuclear Instruments and Methods in Physics Research A, 255, pp.222-224.
https://doi.org/10.1016/0168-9002(87)91105-3

6. Nowotny R., Reiter W. L., (1977). The use of silicon pin-photodiodes as a low-energy photon spectrometer, Nuclear Instruments and Methods in Physics Research A, 147, pp.477-480,
https://doi.org/10.1016/0029-554X(77)90390-1

7. Oliveira C. N. P., Khoury H. J., Santos E. J. P., (2016). PiN photodiode performance comparison for dosimetry in radiology applications, Physica Medica, 32, pp. 1495-1501,
https://doi.org/10.1016/j.ejmp.2016.10.018

.8. Renker D., Lorenz E., (2009). Advances in solid state photon detectors, Journal of Instrumentation, 4, P04004,
https://doi.org/10.1088/1748-0221/4/04/P04004

9. Chierici A., Malizia A., di Giovanni D., Fumian F., Martellucci L., Gaudio P. & d'Errico F. (2021). A low-cost radiation detection system to monitor radioactive environments by unmanned vehicles, The European Physical Journal Plus, volume 136,
https://doi.org/10.1140/epjp/s13360-021-01276-4

10. Achtenberg K., Mikolajczyk J., Szabra D., Prokopiuk A., Bielecki Z., (2020). Review of peak signal detection methods in nanosecond pulses monitoring, Polish Academy of Sciences, Metrology and Measurement Systems, 27(2):203-218,
https://doi.org/10.24425/mms.2020.132770