Termomechan1c treatment of tool steels porous bars
Heading:
| 1Romanyuk, SYa., 1Sanin, AF 1Oles Honchar Dnipro National University, Dnipro, Ukraine |
| Kosm. nauka tehnol. 2002, 8 ;(Supplement1):143-146 |
| https://doi.org/10.15407/knit2002.01s.143 |
| Publication Language: Russian |
Abstract: The high temperature tests mechanic properties of samples, producted by cold pressing of unannealed powder and vacuum sintering, were performed with a aim to investigate an influence of temperature and bands initial porosity at strength and plasticity. The results of high temperature investigations allowed to define the temperature intervals of hot extrusion sintered bars. The mode of hot extrude is found, the composition of special shlicer is developed.
|
References:
1. Manegin Yu. V., Suslov A. G., Luzin Yu. F. The study of the kinematics and distribution of porosity in powder metal during pressing: In the book. Intensification of the production of pressed products, 124—125 (Moscow, Kamensk-Uralsky, 1985) [in Russian].
2. Koval'chenko M. S. Theoretical Fundamentals of Heat Treatment for Porous Materials under Pressure, 256 p. (Naukova Dumka, Kiev, 1980) [in Russian].
3. Prozorov L. V. Pressing of Steel and Refractory Alloys, 378 p. (Mashinostroenie, Moscow, 1969) [in Russian].