Skeletal heat conductivity of porous metal fiber materials
Heading:
| 1Kostornov, AG, 1Shapoval, AA, 2Shapoval, IV 1Frantsevich Institute for Problems of Materials Science , National Academy of Sciences of Ukraine, Kyiv, Ukraine 2Frantsevich Institute for Problems of Materials Science , National Academy of Sciences of Ukraine, Kyiv, Ukraine |
| Space Sci. & Technol. 2021, 27 ;(2):70-77 |
| https://doi.org/10.15407/knit2021.02.070 |
| Publication Language: Ukrainian |
Abstract: The influence of a number of physical characteristics and parameters of metallic fiber materials on their thermal conductivity is studied in this work. Such porous materials are intended, among other things, for their effective use in two-phase heat transfer devices (heat pipes). The use of heat pipes in aircraft and space vehicles provides a number of thermophysical advantages. In particular, heat pipes significantly expand the possibilities of air cooling of heat-loaded technical devices.
The thermal conductivity of capillary-porous materials-structures, which are important elements of heat pipes, significantly affects the intensity of two-phase heat transfer inside heat pipes. Frame thermal conductivity is equivalent to the thermal conductivity of materials that are conditionally continuous medium. Studies of the influence of structural characteristics of porous materials, such as porosity and parameters (dimensions) of discrete particles-fibers (fractions of the studied materials), were performed using special experimental equipment created at the I.M. Frantsevich Institute for Problems of Materials Science of the National Academy of Sciences of Ukraine (Kyiv). Porous metal structures (coatings) made of copper, nickel, and steel fibers (MPM) were investigated under conditions similar to those for space heat pipes. The porosity values of the prototypes of materials were in the range of 40 to 93%.
The research results showed that the following physical characteristics of capillary structures, such as values of thermal conductivity of metallic materials (fiber fractions), the porosity of capillary-porous metal materials (structures), significantly affect the value of thermal conductivity of porous materials.
The dimensions of discrete particles-fibers also affect in a certain way the value of the MBM thermal conductivity but to a lesser degree.
The results obtained in this work are summarized in the form of empirical dependencies – formulas, providing engineering calculations of the thermal conductivity values of metal fiber materials. The research results are intended for practical application in aviation and spacecraft apparatus engineering. In particular, the presented results are necessary for the development and creation of effective heat pipes with metal fiber capillary structures.
|
| Keywords: characteristics and geometric parameters of fibers, diameter, fiber dimensions, frame thermal conductivity, length, metal fiber materials |
References:
1. Vishenskiy S. А., Kashtan V. S., Konoval V. P., Lutsik R. V., Neduzhiy N. A., Tsaturyants A. B. (1988). Characteristics of capillary-porous materials. Kyiv: High school, 168 p. [in Russian].
2. Voronin V. G., Revyakin А. V., Sasin V. J., Tarasov V. S. (1976). Low temperature heat pipes for aircraft. Moscow: Engineering, 200 p. [in Russian].
3. Dulnev G. N., Zarichnyak Y. P. (1974). Thermal conductivity of mixtures and composite materials. Leningrad: Energy, 264 p. [in Russian].
4. Ivanovskiy М. N., Sorokin V. P.,Yagodkin I. V. (1978). The physical basis of heat pipes. Moscow: Atomizdat, 256 p. [in Russian].
5. Kostornov A. G. (1977). Fibrous materials. Encyclopedia of Inorganic Materials in 2 vol. Kyiv: The main edition of the Ukrainian Soviet Encyclopedia, Vol. 1, 204-205 [in Russian].
6. Kostornov A. G. (1983). Permeable metallic fiber materials. Kyiv: Technique, 128 p. [in Russian].
7. Kostornov A. G. (2003). Material science of dispersed and porous metals and alloys. Kyiv: Scientific thought, Vol. 2, 550 p. [in Russian].
8. Kostornov A. G., Galstyan L. G. (1984). Thermophysical properties of porous fiber materials. Powder Metallurgy, № 3, 88-92. [in Russian].
https://doi.org/10.1007/BF00791813
9. Оdеlеvskiy V. I. (1951). Calculation of the generalized conductivity of heterogeneous systems. J. Techn. Phys., 21(6), 667-685 [in Russian].
10. Skorokhod V. V. (1967). Some physical properties of highly porous bodies. Powder Metallurgy, № 6, 33-38 [in Russian].
https://doi.org/10.1007/BF00780131
11. Martynenko O. G., Mikhalevich A. A., Shikov V. K. (Еds). (1987). Handbook of Heat Exchangers in 2 vol. Moscow: Energoatomizdat, Vol. 2, 352 p. [in Russian].
12. Shapoval A. A., Panov Y. M., Shapoval І. V., Ditkivska O. S.. (2019). Porous coatings and structures for the intensification of boiling processes on metallic heat-stressed surfaces. Ukr. Conf. with Int. Participation «Shemistry, Physics and Technology of Surface» and Workshop «Metal-Based Biocompatible Nanoparticles: Synthesis and Applications», Ukraine, Kyiv, May 15-17. Book of abstracts. p. 166.
13. Singh B. S., Dybbs A., Lyman F. A. (1973). Experimental study of the effective thermal conductivity of liduid saturated sintered fibre metal wicks. Int. J. Heat and Mass Transfer», № 16, 145-155.
https://doi.org/10.1016/0017-9310(73)90258-5
https://doi.org/10.1016/0017-9310(73)90258-5
https://doi.org/10.1016/0017-9310(73)90258-5